SUPPORT VIDEOS FOR SETTING UP AND ADJUSTING YOUR LARGE TRUE MIRRORS

Here are some videos and manuals for working with the True Mirror, primarily for the larger sizes.  Info about the 12×12 will be coming…please email info@truemirror.com if you have questions for that size

The key requirement is to unpack your True Mirror, remove the shipping screws and brackets, tighten the seam, and then adjusting the mirror for a perfect image.  A 90.00 degree angle is required, which means that you will need to adjust it frequently, depending on how much the temperature and humidity changes.  Sometimes once every few weeks, sometimes once a day.

Since 2025, we made changes to the full length True Mirror, so there are two sets of instructions:

Unpacking and Adjusting the Full Length True MIrror (After 2025)

Unpacking and Adjusting the Full Length True Mirror (Before 2025)

Unpacking and Adjusting the 18×18 True Mirror (all years just below this link)

Seam Tightening and Adjusting the 18×18 True Mirror (PDF)

Unpacking, Seam Tightening and Adjusting the Full Length True Mirror

The below instructions and videos show how to take your new True Mirror out of shipping mode and then get it adjusted properly

 Click here for the PDF Instructions for taking it out of shipping mode:

 Click for a PDF that describes the adjusting process for a perfect image

Unpacking, Seam Tightening and Adjusting the Full Length True Mirror

(pre 2025) Full Length True Mirror Instructions for unpacking and seam (PDF)

(pre 2025)Adjusting the Full Length True Mirror

The four videos below show:

•  Opening the back after unpacking, seeing the technology for adjusting.
•  The initial seam tightening
•  Final Seam tightening
•  Adjusting